| Display |
Digits: 1999 counts max
Size: 53mm x 62mm
Function: Value and Unit icon
Backlight: On /Off selectable; approx.10 sec./time
|
| Data / Max Hold |
Yes |
| Low Battery |
Icon appears on display |
| Polarity |
Automatic "-" indictation |
| Over Range |
"OL" indication |
| Range Selection |
Manual |
| Sampling Rate |
Approxiamately 2.5 times/sec |
Accuracy Assurance
Temperature/Humidity Range |
18~28°C 75% RH max. |
OperatingTemperature/
Humidity Range |
0~40°C 75% RH max. |
Storage Temperature/
Humidity Range |
-10~50°C 80% RH max.
|
| Power Supply |
One 9V battery (6F 22 or equivalent) |
| Max Voltage |
1000V any terminal to ground |
| Fuse Protection |
250V/0.5A fuse
250V/10A fuse |
| Dimension and Weight |
195(H) x 90(W)x 40(D)mm,approx. 400g |
| Safety |
IEC 1010-1:1990
GB 4793.1-1995
CAT II 100V, CAT
III 600V |
| Elevation |
2000m Operation, 10000m Storage |
| Range |
Accuracy |
Input Protection |
Remarks |
| Function-DCV |
| 200mV |
±(0.5% rdg+1dgt) |
500Vrms |
|
2V
20V
200V |
±(0.5% rdg+1dgt)
|
1000 VDC, 750VAC |
Input impedance 10MΩ |
| 1000mV |
±(0.8% rdg+2dgt)
|
|
|
| Function-ACV |
| 200mV |
±(1.2% rdg+3dgt) |
500Vrms |
Input impedance 10MΩ |
2V
20V
200V |
±(0.8% rdg+3dgt)
|
1000 VDC,
750VAC |
Frenquency response 40-400Hz |
| 1000mV |
±(1.2% rdg+3dgt)
|
|
Mean Value response |
| Function-Ω |
| 200Ω |
±(0.8% rdg+3dgt) |
500V rms |
Test Response is slower at 2000 MΩ |
| 2kΩ |
±(0.8% rdg+13dgt) |
500V rms |
Test Response is slower at 2000 MΩ |
| 20kΩ |
±(0.8% rdg+13dgt) |
500V rms |
Test Response is slower at 2000 MΩ |
| 200kΩ |
±(0.8% rdg+13dgt) |
500V rms |
Test Response is slower at 2000 MΩ |
| 2MkΩ |
±(0.8% rdg+13dgt) |
500V rms |
Test Response is slower at 2000 MΩ |
| 20MkΩ |
±(1% rdg+13dgt) |
500V rms |
Test Response is slower at 2000 MΩ |
| 2000MkΩ |
±(5% rdg+10dgt +10dgt) |
|
|
| Function-Temperature (C° ) |
| -40°C–0°C |
±(3% rdg+4dgt) |
250V rms |
K-type banana-jack bead probe included. Max temp = 230°C |
| 0°C–400°C |
±(1% rdg+3dgt) |
250V rms |
K-type banana-jack bead probe included. Max temp = 230°C |
| 400°C–1000°C |
±(2% rdg+10dgt) |
250V rms |
K-type banana-jack bead probe included. Max temp = 230°C |
| Function-Temperature (F° ) |
| –40°F–32°F |
±(3% rdg+4dgt) |
250V rms |
K-type banana-jack bead probe included. Max temp = 446°F |
| 32°F–752°F |
±(1% rdg+4dgt) |
250V rms |
K-type banana-jack bead probe included. Max temp = 446°F |
| 752°F–1832°F |
±2.5% |
250V rms |
K-type banana-jack bead probe included. Max temp = 446°F |
| Function-DCA |
| 20µA |
±(0.8% rdg+1dgt) |
0.5A/250V fuse |
No more than 10 sec. at interval of 15 min. |
| 2mA |
±(0.8% rdg+1dgt) |
0.5A/250V fuse |
No more than 10 sec. at interval of 15 min. |
| 200mA |
±(1.5% rdg+1dgt) |
0.5A/250V fuse |
No more than 10 sec. at interval of 15 min. |
| 10A |
±(2% rdg+5dgt) |
10A/250V fuse |
No more than 10 sec. at interval of 15 min. |
| Function-ACA |
| 20µA |
±(1.0% rdg+3dgt) |
0.5A/250V fuse |
Frequency response 40-400hz 10A range limit of 10 sec. at interval of 15 min. |
| 2mA |
±(1.0% rdg+3dgt) |
0.5A/250V fuse |
Frequency response 40-400hz 10A range limit of 10 sec. at interval of 15 min. |
| 200mA |
±(1.8% rdg+dgt) |
0.5A/250V fuse |
Frequency response 40-400hz 10A range limit of 10 sec. at interval of 15 min. |
| 10A |
±(0.3% rdg+7dgt) |
10A/250V fuse |
Frequency response 40-400hz 10A range limit of 10 sec. at interval of 15 min. |
| Function-Capacitance |
| 20nF< |
±(2.5% rdg+5dgt) |
250V rms |
|
| 200nF |
±(2.5% rdg+5dgt) |
250V rms |
|
| 2µF |
±(2.5% rdg+5dgt) |
250V rms |
|
| 100µF |
±(5.0% rdg_4dgt) |
250V rms |
|
| Function-Inductance |
| 2mH |
±(2.0% rdg+10dgt) |
250V rms |
Internal impedance<1.3K? |
| 20mH |
±(2.0% rdg+10dgt) |
250V rms |
Internal impedance<1.3K? |
| 200H |
±(2.0% rdg+10dgt) |
250V rms |
Internal impedance<1.3K? |
| 20H |
±(3.0% rdg+10dgt) |
250V rms |
Internal impedance<1.3K? |
| Function-Hz |
2kHz-10Mhz |
±(1.0% rdg+3dgt) |
500V rms |
Input sensitivity <0.8V rms |
| Function-Transistor hFE |
hFE |
1β resolution |
500V rms |
Ib0=10µA
Vcc=2.8V |
| Function-TTL Logic Test |
Logic high>2.0V
Logic low<0.8V |
500V rms |
Buzzer sounds |
| Function-Continiuty Test |
Buzzer sounds at appro. 70Ω |
| Function-Diode Test |
Open voltage: approx. 2.8V
Forward current: approx. 1mA |
